For years there was just one single reliable way for you to keep info on your personal computer – utilizing a disk drive (HDD). However, this sort of technology is already displaying its age – hard drives are loud and sluggish; they are power–hungry and tend to produce a great deal of warmth throughout serious operations.

SSD drives, alternatively, are fast, use up much less power and are generally much cooler. They furnish a brand new strategy to file access and storage and are years in advance of HDDs with regards to file read/write speed, I/O effectiveness and then power efficacy. See how HDDs fare up against the modern SSD drives.

1. Access Time

Image

Because of a revolutionary new approach to disk drive functionality, SSD drives enable for much faster file access speeds. Having an SSD, data accessibility instances tend to be lower (as little as 0.1 millisecond).

Image

HDD drives depend on rotating disks for data storage uses. Each time a file will be used, you have to wait for the appropriate disk to get to the correct place for the laser to reach the file in question. This leads to a regular access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

On account of the exact same revolutionary strategy allowing for a lot faster access times, you may as well enjoy far better I/O performance with SSD drives. They are able to carry out double as many operations during a specific time when compared to an HDD drive.

An SSD can handle at the least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance progressively enhances the more you use the disk drive. Having said that, just after it gets to a particular limitation, it can’t proceed speedier. And due to the now–old technology, that I/O cap is noticeably lower than what you could have having an SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

SSD drives are made to include as less rotating elements as feasible. They use a comparable concept to the one used in flash drives and are significantly more efficient in comparison to classic HDD drives.

SSDs have an average failing rate of 0.5%.

Image

Since we have observed, HDD drives rely upon rotating hard disks. And anything that uses a great number of moving parts for extented intervals is susceptible to failure.

HDD drives’ common rate of failure ranges between 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably smaller compared to HDD drives as well as they do not have any moving elements whatsoever. Consequently they don’t create just as much heat and require less electricity to work and less energy for cooling purposes.

SSDs consume amongst 2 and 5 watts.

Image

HDD drives can be infamous for being noisy; they’re at risk from getting hot and if you have several hard drives inside a hosting server, you must have a further cooling system exclusively for them.

In general, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

The quicker the data file access rate is, the quicker the data file demands will be adressed. It means that the CPU will not have to save resources expecting the SSD to reply back.

The normal I/O delay for SSD drives is actually 1%.

Image

When compared to SSDs, HDDs permit not so quick data accessibility rates. The CPU is going to lose time waiting for the HDD to come back the requested data file, scheduling its resources for the time being.

The regular I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

Almost all of XebecSoft Inc’s brand–new web servers moved to only SSD drives. Our own lab tests have shown that by using an SSD, the typical service time for any I/O request while doing a backup continues to be under 20 ms.

Image

During the same lab tests with the same hosting server, now installed out with HDDs, general performance was considerably slower. Throughout the hosting server backup procedure, the average service time for I/O demands varied between 400 and 500 ms.

7. Backup Rates

Image

You are able to check out the real–world benefits of having SSD drives day after day. For example, with a server built with SSD drives, a full back–up is going to take only 6 hours.

Image

On the other hand, with a server with HDD drives, the same back up can take three to four times as long in order to complete. A full back up of an HDD–equipped hosting server typically takes 20 to 24 hours.

Should you want to at once improve the functionality of one’s web sites and not have to transform just about any code, an SSD–equipped hosting service will be a great solution. Have a look at our Linux shared hosting packages and the Linux VPS web hosting – these hosting services have extremely fast SSD drives and are available at cheap prices.

  • Service guarantees

  •  
  • Our Virtual Private Servers come with no installation costs and function in a stable network providing 99.9% of uptime. Full root access to the server guaranteed.

  • Compare our prices

  •  
  • Find out more about our prices and pick the best Virtual Private Server for your powerful web sites. It is easy to move up to a more powerful VPS Web Hosting configuration with only a click of the mouse.
  • Compare our hosting plans

  • Contact Us

  •  
  • We’re online for you 24x7x365 to respond to any sort of queries in relation to our VPS Web Hosting services. 60–min reply–back time guarantee.